Metallurgy
Metallurgy mainly bearing type:22222CA,22318CA,22320CA,22326CA,22328CA,
22332CA,22338CA,24130CAS1,24132CAS1,24022CAS1,
24030CAS1,24032CAS1,FC304512,FC3044120,FC3044150,
FC3045120,FC3045150......
The use of bearings on metallurgical machinery needs to pay attention to the following points:
1. The appearance and size of the bearing should be checked before installation to ensure that the bearing is not damaged or deformed, and confirm that the size meets the requirements.
2. Before assembly, clean the surface of bearings, shafts and holes, and apply suitable grease or grease.
3. Pay attention to the direction when installing the bearings. Generally, the bearings have axial marks and should be installed in the correct direction during installation.
4. When installing the bearing, ensure that the force is uniform and avoid strong impact to avoid damage to the bearing.
5. During the use of the bearing, it is necessary to maintain good lubrication to avoid dry friction or insufficient oil lubrication.
6. Before the bearing is running, it should be preheated and the temperature should be raised to avoid the problem of expansion and contraction deformation or jamming caused by too low temperature.
7. During the use of the bearing, it is necessary to avoid overloading or overloading to avoid the problem of premature failure.
8. For long-term storage, the bearing should be stored in a dry, cool and ventilated place to avoid damage caused by moisture or pollution.