Ungawagcina kanjani ama-bearings–HZV BEARING FACTORY

Indlela yokugcina iphethe

Izindlela zokulondoloza zihlanganisa uwoyela ovimbela ukugqwala, ukugcinwa kwe-ejenti yesigaba segesi, kanye nesitoreji se-anti-rust esincibilika emanzini.Njengamanje, isitoreji samafutha e-anti-rust sisetshenziswa kakhulu.Amafutha e-anti-rust asetshenziswa ngokuvamile ahlanganisa i-204-1, i-FY-5 ne-201, njll.

Iphethe izidingo zesitoreji

Ukugcinwa kwama-bearings nakho kudinga ukucabangela ithonya lendawo kanye nendlela.Ngemuva kokuthenga noma ukukhiqiza ama-bearings, uma engasetshenziswanga okwesikhashana, ukuze avimbele ukugqwala nokungcola kwezingxenye ezithwalayo, kufanele agcinwe kahle futhi agcinwe.

Izidingo ezithile zokulondoloza kanye nezinyathelo zokuphepha zimi kanje:

1. Iphakheji yokuqala ye-bearing akufanele ivuleke kalula.Uma iphakheji yonakele, iphakheji kufanele ivulwe futhi ukuthwala kufanele kuhlanzwe ngokucophelela, futhi iphakheji kufanele iphinde ifakwe amafutha.

2 Izinga lokushisa lokugcina le-bearing kufanele libe phakathi kwebanga lika-10°C kuya ku-25°C, futhi umehluko wezinga lokushisa phakathi kwamahora angu-24 awuvunyelwe ukuba udlule ku-5°C.Umswakama ohlobene womoya wasendlini kufanele futhi ube ≤60%, kuyilapho ugwema ukugeleza komoya kwangaphandle.

3 Umoya one-asidi wenqatshelwe ngokuphelele endaweni yokugcina impahla, futhi amakhemikhali agqwalayo njengamanzi e-ammonia, i-chloride, amakhemikhali ane-asidi, namabhethri akufanele agcinwe ekamelweni elilodwa ne-bearing.

4. Ama-bearings akufanele abekwe ngqo phansi, futhi kufanele abe ngaphezu kuka-30cm ngaphezu komhlabathi.Ngenkathi ugwema ukukhanya okuqondile futhi useduze nezindonga ezibandayo, kuyadingeka futhi ukuqinisekisa ukuthi ama-bearings abekwe ngokuvundlile futhi awakwazi ukubekwa ngokuqondile.Ngenxa yokuthi izindonga zamasongo angaphakathi nangaphandle e-bearing mancane kakhulu, ikakhulukazi uchungechunge olukhanyayo, uchungechunge lwe-ultra-light kanye ne-ultra-light series bearings, kulula ukubangela ukuguquguquka uma ubekwe ngokuqondile.

5 Amabheringi kufanele agcinwe endaweni ezinzile ngaphandle kokudlidliza ukuze kuvinjwe umonakalo odalwe ukushwiba okukhulu phakathi komzila womjaho nezinto eziginqikayo ezibangelwa ukudlidliza.

6 Ama-bearings kudingeka ahlolwe njalo ngesikhathi sokugcina.Uma ukugqwala kutholakele, sebenzisa ngokushesha amagilavu ​​kanye nosilika we-kapok ukuze usule i-bearing, shaft kanye negobolondo, ukuze ususe ukugqwala futhi uthathe izinyathelo zokuvimbela ngesikhathi ngemuva kokuthola imbangela.Ukuze ugcine isikhathi eside, ama-bearings kufanele ahlanzwe futhi afakwe amafutha njalo ngemva kwezinyanga ezingu-10.

7 Ungathinti i-bearing yakho ngezandla ezijulukile noma ezimanzi.